ASME A112.6.3-2001 Floor and Trench Drains
|
ID： |
9C24AF01E6D94369A25C47A736793016 |
|
文件大小(MB)： |
6.79 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2009-11-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
ASME A112.6.3-2001,(Revision and Redesignation of ASME A112.21.1M-1991),FLOOR AND,TRENCH DRAINS,A N A M E R I C A N N AT I O N A L S TA N D A R D,--`,`````,``,`,`,,,,``,,`,`,,,,,-`-`,,`,,`,`,,`---,A N A M E R I C A N N A T I O N A L S T A N D A R D,FLOOR AND,TRENCH DRAINS,ASME A112.6.3-2001,(Revision and Redesignation of ASME A112.21.1M-1991),--`,`````,``,`,`,,,,``,,`,`,,,,,-`-`,,`,,`,`,,`---,Date of Issuance: November 20, 2001,The next edition of this Standard is scheduled for publication in 2005. There,will be no addenda or written interpretations of the requirements of this,Standard issued to this edition.,ASME is the registered trademark of The American Society of Mechanical Engineers.,This code or standard was developed under procedures accredited as meeting the criteria for,American National Standards. The Standards Committee that approved the code or standard,was balanced to assure that individuals from competent and concerned interests have had an,opportunity to participate. The proposed code or standard was made available for public review,and comment that provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.,ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device,or activity.,ASME does not take any position with respect to the validity of any patent rights asserted in,connection with any items mentioned in this document, and does not undertake to insure anyone,utilizing a standard against liability for infringement of any applicable letters patent, nor assume,any such liability. Users of a code or standard are expressly advised that determination of the,validity of any such patent rights, and the risk of infringement of such rights, is entirely their,own responsibility.,Participation by federal agency representative(s) or person(s) affiliated with industry is not to,be interpreted as government or industry endorsement of this code or standard.,ASME accepts responsibility for only those interpretations of this document issued in,accordance with the established ASME procedures and policies, which precludes the issuance,of interpretations by individuals.,No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.,The American Society of Mechanical Engineers,Three Park Avenue, New York, NY 10016-5990,Copyright . 2001 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,All Rights Reserved,Printed in U.S.A.,--`,`````,``,`,`,,,,``,,`,`,,,,,-`-`,,`,,`,`,,`---,FOREWORD,The American National Standards Committee A112 was established on July 27, 1955,for the purpose of standardizing plumbing materials and equipment. Its first organizational,meeting was held on July 22, 1958, and Panel No. 21 was created on May 1, 1964 to,establish standards for roof drains, floor drains, backwater valves, and other drainage,specialties. Its scope was as follows: the recommendation of suitable existing standards,in cooperation with interested sponsors, or the development of adequate new standards as,needed for roof drains, floor drains, and other drains as used or installed in plumbing,systems. The committee has since been reorganized as an ASME Standards Committee.,The ASME A112 Committee was restructured in 1998 in accordance with the ASME,Redesign Process, and Panel 21 Working Group 1 became Project Team 6.3. The Project,Team met twice to update this Standard, which now includes criteria from the International,Association of Plumbing and Mechanical Official’s (IAMPO) Product Standards PS 4 and,PS 16.,Suggestions for improvement of this Standard are welcome. They should be sent to the,American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990.,This revision and redesignation of ASME A112.21.1M-1991 was approved as an American,National Standard on May 4, 2001.,iii,--`,`````,``,`,`,,,,``,,`,`,,,,,-`-`,,`,,`,`,,`---,ASME STANDARDS COMMITTEE A112,Standardization of Plumbing Materials and Equipment,(The following is the roster of the Committee at the time of approval of this Standard.),OFFICERS,P. J. Higgins, Chair,S. A. Remedios, Vice Chair,C. J. Gomez, Secretary,COMMITTEE PERSONNEL,R. H. Ackroyd, Consultant,J. A. Ballanco, JB Engineering & Code Consulting,S. L. Cavanaugh, United Association,A. Cohen, A. Cohen & Associates,P. V. DeMarco, American Standard, Inc.,N. Covino, Alternate, American Standard, Inc.,G. S. Duren, Code Compliance, Inc.,R. Emmerson, Chicago Faucets Co.,F. C. Evans, Zin-Plas Corp.,L. S. Galowin, National Institute of Standards and Technology,C. J. Gomez, The A……
……